Do you want to install a garden gate to secure access to your orchard? Setting up such equipment requires careful planning for a successful outcome. Indeed, there are several important precautions to take as part of this project.
From the technical aspects of gate installation to compliance with safety standards and various regulations, we facilitate the process to help you reach your goal. As a specialist in providing equipment for fence design, Clôture Discount guides you through the prerequisites for the success of your project.
Technical precautions for installing your garden gate
The technical phase of the precautions to be taken could be summarized as finding a professional qualified in the installation of gates or pedestrian gates. Indeed, this specialist masters the requirements necessary for choosing the equipment as well as the installation process. They can even be useful in guiding you through the legal obligations related to the installation of your garden gate. However, if you wish to handle the selection of materials personally, you will need to take a few precautions.
You can take charge of taking measurements to accurately determine the size and width of your gate. Next, check the type of soil on which the tool will be installed as well as the degree of slope (flat or sloped), etc. This information will help identify the precise locations for installing the pillars. However, the electrical aspect of the installation requires the intervention of a specialist. To add any electrical device to the gate pillars, call upon a competent professional. Finally, note that the success of a gate installation project assumes that technical and legal instructions are taken into account simultaneously.
Legal and safety precautions
The installation of a gate is regulated at various levels. For the installation of your garden gate, ensure the equipment complies with safety standards at every level: national, municipal, and co-ownership. You must also submit prior declarations to have the dimensions, colors, and materials chosen for the gate validated by the competent authorities. At the municipal level, for example, the Local Urban Plan (PLU) likely specifies a maximum height for gates.
Failing that, the Civil Code provides for this in Article 663 (3.20 m maximum in cities with more than 50,000 inhabitants and 2.60 m for other towns). This rule must be strictly respected. It may also be reinforced by your co-ownership internal regulations, further reducing the height limit. It is therefore advisable to inquire at each level about the rules applicable to the type of gate in order to comply. For all gates with manual or motorized opening, the European standard EN 13241-1 has been in force since 2005. You can always seek the support of a specialist who, thanks to their experience, will allow you to move faster in the realization of your project.
Installing a swing gate
The web is full of tutorials of all kinds, which are very practical for amateur DIYers! Because a picture is worth 1,000 words, here is a video guide on installing an aluminum swing gate.
Installing a swing gate requires a certain level of skill and adherence to specific steps. Although professional intervention is recommended, it is possible to carry out the installation yourself by following seven simple steps. The first step consists of installing the first hinge by positioning it on the corresponding shim, while ensuring the hinge axis is kept at least 90 mm from the edge of the pillar. It is crucial to check the difference in level between the two pillars and to position the first hinge on the highest side.
Next, you must position the final hinges using a laser level or a spirit level to project the height of the second hinge onto the opposite pillar. The hinges must be properly aligned with the ground axis to prevent the gate from coming off its hinges. The third step consists of installing the gate leaf, an operation that requires assistance to position the leaf on the hinges and adjust the level. It is essential to correctly fix all parts to ensure the stability of the leaf and avoid any risk of crushing. Regular checks of the hinge locks are necessary to guarantee the safety of the installation.
Installing a sliding gate
We have already written a complete guide on installing a motorized sliding gate. But once again, images are more telling. So here is a guide to installing a sliding gate yourself.
Expert in fencing, gates, and outdoor landscaping since 2019.
Holds a Master’s degree in Digital Marketing – SEO, UX/UI.
View LinkedIn profile
