Are you installing a motorised gate on an industrial site, a shared car park, or in a residential complex? Then you are directly concerned by the NF EN 13241+A2 standard. This European standard governs the manufacture, performance and safety of industrial, commercial and residential doors and gates. It is not optional: it is a regulatory requirement linked to CE marking. Here is what you need to know to stay compliant and avoid issues during an inspection.
What the NF EN 13241+A2 standard actually covers
The NF EN 13241+A2 standard applies to all gates, industrial doors, roller shutters and barriers installed in areas that are not exclusively for private use. Warehouses, factories, condominiums, underground car parks, schools, hospitals, logistics zones: as soon as a gate is motorised and accessible to the public or employees, this standard applies.
It sets requirements across several criteria: mechanical strength, wind resistance, operational safety, durability, and protection against crushing or shearing hazards. The manufacturer must provide a Declaration of Performance (DoP) and affix the CE marking to the product. Without this, the installation is non-compliant. Period.
Why industrial and shared-use areas are particularly targeted
On a typical residential site, a gate serves a single home. In industrial or shared-use areas, the constraints are of a different order. The gate undergoes far more frequent opening/closing cycles—sometimes several hundred per day on a logistics site. The vehicles passing through are heavier. And the flow of people in the immediate vicinity of the gate significantly increases the risk of an accident.
That is why the NF EN 13241+A2 standard requires enhanced safety devices in these contexts: photoelectric cells, safety edges, presence-detection systems, and closing-force limitation. A 6-metre sliding gate on an industrial site without this equipment is both a hazard and a clear case of non-compliance.
Safety requirements not to overlook
The standard is based on a set of complementary standards, notably NF EN 12604 (mechanical strength) and NF EN 12453 (safe use of powered doors). Together, they require that any motorised gate used in a shared or industrial setting meets at least the following:
- Limitation of operating forces to prevent crushing a person or an obstacle
- Detection devices (cells, safety edges, radar) suited to the type of installation and the frequency of use
- A manual release system in the event of a power failure
- Visual and/or audible signalling when the gate is moving
Ignoring even one of these points makes the project owner and the installer liable in the event of an accident.
CE marking and Declaration of Performance: the mandatory minimum
Since 2005, CE marking has been mandatory for all gates and doors covered by the NF EN 13241 standard. Amendment A2 strengthened certain requirements, notably regarding the clarity of the technical documentation supplied with the product. In practical terms, each delivered gate must come with installation instructions, user instructions, and the Declaration of Performance stating the tested characteristics.
At Districlos, the gates offered for industrial or shared-use applications meet these requirements. Documentation is provided, performance is declared, and our teams support both professionals and private individuals in choosing the equipment suited to the installation context.
What changes for installers and site managers
An installer who fits a motorised gate in a shared-use area without complying with NF EN 13241+A2 takes a real legal risk. In the event of an accident, the insurer may seek recourse against them if the equipment is non-compliant or if the safety devices were not correctly sized for the intended use.
For managers of industrial sites or condominiums, responsibility is shared. They must ensure the gate remains compliant over time: periodic checks of safety components, maintenance of the motorisation, replacement of wear parts. A gate that is compliant on delivery but never maintained loses its compliance—the standard explicitly provides for this.
How to choose a compliant gate for your project
Choosing an industrial or shared-use gate is not just a matter of dimensions or colour. You need to consider frequency of use, vehicle types, the environment (wind exposure, salinity, temperature), and the level of safety required by the site configuration.
Districlos can guide you in this choice. Whether you are equipping a warehouse, a residential car park or a business park, our advisers help you identify the right gate—compliant with NF EN 13241+A2—ready to install, in stock, and deliverable to your site.
Expert in fencing, gates, and outdoor landscaping since 2019.
Holds a Master’s degree in Digital Marketing – SEO, UX/UI.
View LinkedIn profile
