PROJET EN FÊTE -75€ tous les 500€ d'achat
GOOD DEAL Free shipping from 999€
↓Bulk
Pricing

Measuring guide

How to Take Accurate Measurements for Your Fence Project

Before ordering your fence, it’s essential to measure your site carefully. The measuring process is the same whether you’re installing posts with base plates or setting them directly into the ground.
Don’t worry if you’re new to this—just follow these straightforward steps.

1. Determine the Total Length

photo exemple de mesure du périmètre

Example perimeter measurement: 20+10+20+10 = 60 m

photo exemple de mesure d’un terrain en L : additionnez chaque côté

Example for an L-shaped lot: add up the length of each side

2. Choose the Height

photo calcul de la longueur totale H: Measure the height of your fence, considering the portion above ground.
1

Your needs:
24"–48": suitable for marking property lines
60"–72": a good balance for home security and privacy
80" and above: ideal for maximum privacy.

+8–12" for posts set on a wall

+12–20" for posts set directly in the ground

(depends on soil type)

photo hauteur de clôture Check your local codes for maximum fence height before making a decision.
2

Local regulations:
Each city or county may have its own zoning rules that set a maximum fence height. In some areas, you may be limited to 72" or required to follow specific design guidelines (such as in subdivisions or historic districts). Always check with your local building department before ordering to avoid issues.

photo soubassement

3. Decide if You Need a Base or Curb

A base (concrete curb or slab) can help:

  • • Prevent grass from growing under the fence
  • • Retain soil if your yard isn’t level (up to 30% of the base height)
  • • Add strength and stability
  • • Deter animals from entering your yard
  • • Enhance the overall appearance

If your ground is flat and even, a base is optional.

There are two main types of bases: concrete or powder-coated steel.

photo platine

4. Decide if You Need a Base Plate

A base plate allows you to anchor posts to a concrete surface. On a wall or slab, it secures both the post and the fence panel.

Note: If you plan to add privacy slats to a rigid fence, setting posts in concrete is recommended. Using base plates is not advised for privacy panels, as the added weight and wind load can damage the fence.

5. Account for Sloped Ground

Stepped installation (terraced): Each section is installed level, but offset in height from the previous one.

To plan for this, measure the length of each level section (horizontal segment).

You can add a base to each step, either by burying it or cutting it to the right length.
Alternatively, cut your panels to size or use chain link mesh, which is easier to adapt.

Schéma d’installation sur terrain en pente

If you’re unsure, contact our customer service at 0422531034.

6. Calculate the Number of Posts Needed

Schéma illustrant le calcul du nombre de poteaux

The number of posts depends on your total fence length and the type of fence. Each fence panel is installed between two posts.
Each panel is 8 ft 2 in long.

Example: For 82 ft of fencing with 8 ft 2 in panels: 82 ÷ 8.2 = 10 panels
You’ll need 11 posts (1 starter post + 1 post between each panel)

Our posts are designed for corners, so you don’t need extra posts for angles! If you’re adding a base, double the number of posts required.

Each rigid mesh panel measures 8 ft 2 in long.
For certain layouts or custom lengths—such as 20 ft or along a curve—you can trim a panel to fit. Rigid mesh panels can be cut easily with the right tool (angle grinder or bolt cutters) for a perfect fit.

In Summary:

Measure your total perimeter.
Choose your fence height (based on your needs and local codes).
Decide if you need a base or base plate.
Check if your ground is level or sloped.
Count your corners to determine the right number of posts.
With these details, you’ll be ready to select the best fence for your property.

A question about this product?

Brico+ Rigid Mesh Fence Kit with Base Plates (4/4mm)

REF kit-grillage-rigide-platines-brico-plus

This complete rigid mesh fence kit includes everything you need to install your own fence. You'll receive all the materials required to easily set up a modern, attractive wire mesh fence at home.

Read more

Choose the length in linear meters Linear meters calculation: sum of all lengths in meters

Enter your length

Please fill in this field

Volumediscounts!
Number of lm +40 lm
% discount 5%
BRICO+ Rigid Wire Mesh Fence Panel Districlos
Range
Color
Height
Tempo Welded Base Plate Post
Color
Height
Cap for Tempo Rigid Fence Post
Color
Cheville 12/100
Color
Size
PROJET EN FÊTE -75€ tous les 500€ d'achat

Delivery icon
Home delivery free from 999 € incl. tax Within 10 days.
Delivery icon
In-store stock Incoming shipment

Lowest price on the web guaranteed

Found it cheaper elsewhere? We refund you the difference.

Panneau grillage rigide
x1

BRICO+ Rigid Wire Mesh Fence Panel Districlos

Brico+ (4/4 mm wire), Gray 7016, 3 ft 5 in

Our rigid mesh fence panels feature a support-free fastening system for quick and easy installation. The anti-corrosion coating ensures long-lasting durability, making these panels suitable for any outdoor setting.
Select your preferred color, panel height, and mesh type to fit your project.

Poteau Tempo sur Platine Soudée pour grillage rigide
x2

Tempo Welded Base Plate Post

Gray 7016, 3.5 ft

The rigid mesh fence post is essential for keeping your rigid panel fence stable and secure. Made in France and backed by a 10-year warranty, this post is built from durable materials for long-lasting performance.

End caps are sold separately.

Anchors are not included.

Bouchon pour poteau Tempo
x2

Cap for Tempo Rigid Fence Post

Black RAL 9005

Black PVC cap designed for the Tempo post used with rigid mesh fencing. This cap seals the top of the post and provides a clean, finished look.

x4

Cheville 12/100

Galvanized, 12 x 100 mm

Panel and Post Height Guide

Panel Height Post Height

Finished Height
with concrete base

Surface Mount Set in Concrete With Base Panel
0m63 0m67 0m87 NC NC
0m83 0m87 1m07 NC NC
1m03 1m07 1m27 1m77 1m28
1m23 1m27 1m57 1m97 1m48
1m53 1m57 1m97 2m17 1m78
1m73 1m77 2m17 2m47 1m98
1m93 1m97 2m47 2m87 2m18


Note: The posts included in our kits are designed for standard installation on level ground. If your site has a slope, you may need longer posts.

kit-grillage-rigide-platines-brico-plus
0 Items

Data sheet

Application
Residential & Commercial
Installation type
With base plates
Origin
Europe
Warranty
10 years
PROJET EN FÊTE 75€ offert tous les 500€ d'achat !