How to Choose the Right Sliding Gate for Your Property

Thinking about installing a sliding gate to update your entrance, save space, or secure your property? This guide walks you through how to measure for a sliding gate step by step, highlights common mistakes to avoid, and helps you select the best gate for your outdoor space.

1. Measure the Width Between Posts

Measure the inside distance between the two posts at three different heights:

A

Top

B

Middle

C

Bottom

Why three measurements? Posts may not be perfectly parallel—especially on older installations or if they've shifted over time.

Record the smallest of the three measurements—this is the usable width for your gate.
If the difference between measurements is more than 1 cm (about 3/8"), check the alignment of your posts before installation. Example: If you measure 3.03 m at the top, 3.01 m in the middle, and 3.02 m at the bottom, use 3.01 m as your reference width.

2. Measure the Height from the Ground to the Bottom of the Post Cap

Next, measure the total height available from the finished ground level up to the underside of the post cap (or cover).

• • Take this measurement on both sides, as the ground may slope slightly.
• • The final gate height should be 2 to 4 inches (5–10 cm) less than the available height to allow clearance for hinges and smooth operation.

Make sure the rack and gate motor (if using automation) will fit without interfering with the gate height.

4. Check Ground Level and Alignment

Before installing a sliding gate, make sure the ground is flat and solid. If the surface isn't level, the gate may drag, jam, or wear out faster.
The ground should be firm and free of holes or bumps—even small uneven spots can cause issues. If needed, pour a level concrete pad (threshold) the full width of the opening.

If your driveway slopes, consider a cantilever gate (which doesn't require a ground track) or adjust the concrete pad to create a level base. Always use a laser or bubble level before installation to ensure everything is straight—this helps your gate slide smoothly and last longer.

Summary:

Measure the width between posts at the top, middle, and bottom. Use the smallest value.
Measure the gate height from the ground to the post cap.
Allow for side clearance at least equal to the gate width plus 20 inches (50 cm).
Check that the ground is flat and stable. Install a concrete threshold if needed.

If you're unsure, contact a professional for on-site measuring—it's the best way to ensure a perfect fit.